Buy Obut if you want the widest range of models at every price. Buy MS Pétanque if a boule that stops dead on impact is your top priority.
Buy La Boule Bleue if you want a soft, individually tempered boule from a Marseille workshop founded in 1904. All three are French and all three make boules approved for sanctioned play, so the choice turns on hardness and playing role far more than on the name stamped into the steel.
Founding dates and hardness range
Founding dates and hardness figures, from each company’s own pages.
- 1904La Boule Bleue, MarseilleFounder Félix Rofritsch, each boule tempered individually
- 1955Obut, Saint-Bonnet-le-ChâteauSouvignet family owners since 1958, sole shareholders from 2003
- 1993MS Pétanque, Nogent, Haute-MarneOriginally Marle Sport, José Sanchez in charge since 2017
- 110 to 140+Hardness band the three coverkg/mm², very soft to hard
obut.com, laboulebleue.fr and ms-petanque.com.
The three makers compared
What each maker is for, and what its range costs at the workshop door.
| Obut | MS Pétanque | La Boule Bleue | |
|---|---|---|---|
| Making boules since | 1955 | 1993 | 1904 |
| Base | Saint-Bonnet-le-Château | Nogent, Haute-Marne | Marseille |
| Scale | 200,000 boules a month | A team of about ten | Artisanal, each boule tempered individually |
| Known for | Range and volume | Anti-rebound ribbing on impact | Soft steel and the blue tint |
| Competition price range | €93 to €320 | €121 to €278 | €125 to €270 |
| Hardness published | Category and approximate figure per model | Per model on the maker site | In the model name |
| Best suited to | Any role, any budget | Shooters and all-round players | Shooters and soft-steel players |
Prices are per set of three at each maker’s own store, read September 16, 2026.
obut.com, ms-petanque.com, laboulebleue.fr.
The competition rules all three brands follow
Article 2 of the official rules sets the same limits for every maker: a diameter of 7.05 to 8 cm and a weight of 650 to 800 grams. The boule must also be hollow, with no lead, sand or mercury inside.
The manufacturer trademark and the weight have to be engraved and stay legible, and re-tempering a boule to change the hardness the factory set is forbidden. Article 2a disqualifies a player who breaches that condition, along with their partners.
Players aged 11 or under in the year may use lighter boules of 600 grams and 65 mm under an approved label. Our glossary covers the terms used below.
Those limits leave plenty of room. Inside them sit the real differences between brands, from a 110 kg/mm² shooter’s boule to a pointer’s boule above 140 kg/mm².
Obut, the safe choice for consistency and range
Obut has made boules in Saint-Bonnet-le-Château since 1955, when Frédéric Bayet and Antoine Dupuy registered the trademark. The Souvignet family bought the factory in 1958, became sole shareholders in 2003 and still run it, with Romain Souvignet president since 2022.
The company reports 200,000 boules produced per month, 2,000 metric tons of steel and 12,000 m² of workshop, plus Entreprise du Patrimoine Vivant certification held since 2012.
What that buys a player is range. The lineup is wide enough that you rarely have to compromise on diameter or weight.
Our RCX review covers how the impact-absorber generation plays against the older stainless models.
MS Pétanque, built to kill the rebound
MS Pétanque works out of Nogent in Haute-Marne with a team of about ten. José Sanchez joined in 1996 and has run the company since 2017.
Bernard Marle founded it in 1993, and MS stands for Marle Sport. His company makes orthopaedic implants, and he filed three patents for the first MS boule, the VMS Plot.
The brand is known for internal ribs, produced through forging, meant to absorb the shock wave of a hit instead of letting it push the boule away. The company calls it a patented anti-rebound system.
Shooters care about that more than anyone, since a boule that soaks up the impact stays in the space it just cleared. Our reviews cover two of them, the 1PACT and the STRX Inox.
MS lists a hardness on every model page except the Master Inox. The range runs from 110 kg/mm² on the 2110 to 135 on the CZ Inox.
MS Pétanque hardness, softest to hardest
Figures from each model page. The Master Inox page gives none.
| Model | Hardness | Maker description | Suits |
|---|---|---|---|
| 2110 | 110 kg/mm² | Very soft | Shooting |
| STRA, LSX, STRX | 115 kg/mm² | Soft | Shooting |
| L’IT, 1PACT, MS Acier, MS 120 | 120 kg/mm² | Semi-soft | All-round |
| MS Inox | 130 kg/mm² | Semi-soft | All-round or pointing |
| CZ Inox | 135 kg/mm² | Hard | Pointing |
ms-petanque.com model pages.
The trade-off with the softest MS models is the one every soft boule carries, which is cosmetic damage arriving fast. Our post on keeping boules in shape covers what that costs you in practice.
La Boule Bleue, artisanal boules from Marseille since 1904
La Boule Bleue calls itself the oldest boule maker still in business. Félix Rofritsch founded it in Marseille in 1904, and four generations on each boule is still tempered individually in an artisanal workshop.
The brand takes its name from the natural blue reflections of its tempered carbon steel.
The range is organized around hardness, with the figure in each model name. Every set carries a five-year warranty.
Our Prestige Inox 110 review goes into what very soft stainless feels like on a hard terrain.
Orders placed before Sunday midnight ship on Friday or Monday. Delivery abroad then takes 2 to 13 days with TNT or 7 to 30 days with Colissimo.
Hardness counts for more than the brand name
Makers quote hardness in kilograms per square millimeter. The official rules require only the maker trademark and the weight to be engraved, so a printed hardness number is common practice rather than a rule.
A soft boule in the 110 to 120 band absorbs more of the impact energy, kills its own rebound and stays close to where it landed. A hard boule at 135 or above resists denting and survives being shot at all season.
Pointers lean hard or semi-hard because their boules spend the game sitting in the head getting hit. Shooters lean soft because the carreau, replacing the target boule in its own spot, depends on the shooter’s boule not bouncing away.
Players who do both land near 120 to 125 kg/mm² and accept that neither job is perfectly served. Our post on hardness and rebound goes deeper into the mechanism.
What the hardness numbers mean
The labels the three makers use, softest to hardest.
| kg/mm² | Description | Typical role |
|---|---|---|
| 110 | Very soft | Shooting |
| 115 | Soft | Shooting |
| 120 | Semi-soft | All-round |
| 125 | Semi-hard | All-round or pointing |
| 130 | Half-soft at Obut, semi-soft at MS | All-round or pointing |
| 135 to over 140 | Hard | Pointing |
Which brand suits a pointer, a shooter and a milieu
Most Obut competition models are half-soft, so the role choice inside the Obut lineup comes mostly from diameter, weight and striations. The soft TON’R and Soleil and the hard Boule Noire, over 140 kg/mm², are the exceptions.
Obut’s own advice is consistent on those three: pointers take a smaller diameter, a heavier boule and striations for grip, while shooters take a larger diameter, a lighter boule and a smooth surface.
Models that suit each playing role
Steel type is the last call, and stainless is the safer pick near the coast.
| Playing role | What the boule needs | Obut | MS Pétanque | La Boule Bleue |
|---|---|---|---|---|
| Pointer | Harder shell, smaller diameter, striations, heavier | Boule Noire, Match | MS Inox, CZ Inox | Bleue 140, Super Inox 125 |
| Shooter | Very soft, larger diameter, smooth, lighter | TON’R, Soleil, RCX | 2110, STRX, LSX | Prestige Carbone 110, Prestige Inox 110 |
| Milieu | Semi-soft middle ground, moderate diameter | Superinox, CX COU | 1PACT, MS 120 | Carbone 120, Inox 120 |
obut.com boule selection advice and model pages. Maker hardness figures for MS and La Boule Bleue.
Our pages on pointing and shooting explain why those specifications follow from the throw itself, and our post on choosing a boule size covers the diameter question on its own.
What each budget buys
Under €130
The Obut Match at €93 is the cheapest competition boule any of the three makes. The MS 120 at €121 and the La Boule Bleue Bleue 140 at €125 sit just above it, one semi-soft and one hard.
€150 to €200
The field opens up. La Boule Bleue’s carbon and stainless mid-range sits here alongside the Obut Match IT and most of the MS carbon ladder, and the decision is mostly steel type.
Carbon needs wiping and oiling, stainless does not. A coastal or humid terrain answers that question for you.
Above €200
You are paying for metallurgy rather than a badge. The Obut RCX and ATX, the MS L’IT and Master Inox and the La Boule Bleue Prestige pair all target controlled deadening on impact.
Players coming from a first set should read our beginner sets roundup before jumping to that tier.
How to choose without holding the boules first
Few players in North America get to handle all three brands before buying. Work from the three things you can measure without a shop.
Your hand size fixes the diameter and your role fixes the hardness and weight. Your home terrain decides the steel, with stainless the safer pick near the coast or anywhere humid.
Run those three inputs through our boule selector and it returns specific models rather than a brand preference. Then buy the boule the numbers point to, from whichever of the three makes it.
Frequently asked questions
Which brand is best for a beginner?
Obut, on price and availability. The Match at €93 is the cheapest competition set of the three and the range is wide enough to replace it like for like years later.
Are MS Pétanque boules harder or softer than Obut?
It depends on the model. MS runs from 110 kg/mm² on the 2110 to 135 on the CZ Inox, while Obut runs from the soft TON’R to the Boule Noire at over 140, with most models half-soft.
Why is La Boule Bleue blue?
Tempered carbon steel shows natural blue reflections. Those reflections gave the brand its name.
Is stainless steel worth the extra money?
Near the coast or in a humid climate, yes. Stainless needs no oiling and will not rust in a damp bag, and the price gap inside each range runs around €15 to €60.
Do these makers publish a hardness for each model?
Mostly. La Boule Bleue puts the figure in the model name, MS lists it on every model page except the Master Inox and Obut gives a category plus an approximate figure, for example half-soft at about 130 kg/mm².
Can I mix brands inside one set of three?
The FIPJP rules do not forbid it, since Article 2 sets its limits for each boule on its own. A matched set still gives you the same weight and feel on every throw.
Where to go next
Read the individual reviews in our review section, then run your hand size, role and terrain through the boule selector for specific models.
Sources
- Obut competition boules, prices and range
- Obut company history
- Obut, how to choose your boules
- MS Pétanque, model range and prices
- La Boule Bleue, model range and prices
- FIPJP Official Rules, Articles 2 and 2a


