Check four things before you pay for a used set: the engravings, the weight, the diameter and the condition of the steel. A boule can fail the examination in sanctioned play if it weighs under 650 g, has lost more than 15 g from its engraved weight (the wear limit in the FIPJP approval rules) or no longer shows a readable maker’s mark and weight, and a boule that fails has to be changed.
The checks come from the FIPJP official rules, which the national federations of the United States, Canada and Mexico play under, and from the FIPJP approval rules for boules. You need a kitchen scale, a caliper or ruler and five minutes.
Leisure set or competition set?
What a set is worth to you depends on where you plan to play. Leisure boules carry no FIPJP approval, so they are not legal in sanctioned play, and they suit the park and the backyard well.
FIPJP approval is granted to a label, the maker’s code for one production, and every approved boule carries that label engraved on it. If you only plan to play with friends, a sound leisure set does the job; if you want to enter club tournaments, buy approved boules.
What the engravings tell you
| Engraving | What it means | What to check |
|---|---|---|
| Maker’s mark and label | The label identifies the approved production | Present and readable on every boule |
| Weight in grams | Three digits, for example 690 | Matches the scale, allowing for wear |
| Identification reference | Letters or numbers that tell your set from other sets | Same reference on every boule in the set |
| Name, initials or another symbol | Optional, the player’s name, initials or another symbol | Allowed, and no reason to refuse a set |
The approval rules for boules forbid altering this marking after the sale. The official rules add that the maker’s trademark and the weight must always be legible, and a worn boule that fails the examination has to be changed.
Weigh and measure each boule
Weight
Put each boule on a kitchen scale and compare the reading with the engraved figure. New boules may sit up to 5 g off their engraving, and the approval rules allow wear to take them no more than 15 g below the marked weight.
| Scale reading against the engraving | What it means |
|---|---|
| Within 5 g | Inside the manufacturing tolerance, if it weighs 650 to 800 g |
| 6 to 15 g under | Worn but inside the wear limit, if it still weighs at least 650 g |
| More than 15 g under | Past the approval wear limit, so expect it to fail an examination |
| More than 5 g over | Outside the manufacturing tolerance, so ask the seller why |
Diameter
Measure across the widest point with a caliper. Approved boules run from 70.5 to 80 mm, and in competitions reserved for players aged 11 or under, 600 g boules 65 mm across are allowed.
Size is a comfort question more than a rules question. Our post on boule specifications explained shows how to match diameter to your hand.
Inspect the steel
- Rust: carbon steel rusts when it is stored damp. Light surface rust comes off with a brass brush and a drop of oil, the routine set out in our boule care post.
- Pitting: deep pits cannot be polished away without removing steel, which also removes weight. Weigh the boule again after any polishing, since the rules check its weight against the engraving and against the 650 g minimum.
- Dents and flat spots: soft steel marks sooner than hard steel, so judge dents against the hardness of the set. A flat spot that changes how the boule rolls is a reason to walk away.
- Grooves: striations are allowed up to 1 mm deep. Our post on what striations do covers how they affect grip.
Red flags
Shake each boule close to your ear. The approval rules require the inside to be free of metal particles, scale and foreign bodies, so a rattle means a problem.
Turn down a set with signs of grinding or filing near the engravings, because the official rules forbid lead, sand or mercury inside the boule, any change after machining and any re-tempering. A player found with a tampered boule is disqualified together with the partners.
Mismatched sets are a smaller issue. The approval rules require the boules of one set to match, all smooth, all striated or all with hollows, and different references on one set tell you the boules came from different sets.
Before you hand over the money
- Read the maker’s mark, label and weight on each boule.
- Weigh each one and compare it with the engraving.
- Measure the diameter, then hold the boule palm down to test the fit.
- Check for rust, pitting, flat spots and rattles.
- Ask how the set was stored and how often it was played.
If the set passes, wipe it down and give carbon steel a light coat of oil before storage. See what new boules cost on our equipment page, a reference point when a seller names a price.
Frequently asked questions
Are used boules legal in competition?
Yes, if the model holds FIPJP approval, the maker’s mark and weight are legible and each boule still weighs at least 650 g with no more than 15 g lost from its engraved weight. An umpire can ask to examine any player’s boules at any time.
A boule that fails the examination has to be changed, and the player may change the whole set. Weigh each boule before you pay, since the check takes a minute.
How do I know if boules are competition approved?
Look for the maker’s mark, the label and the weight engraved on each boule. A leisure set carries no approval, so ask the seller for the model name and check it with the maker.
Can I buy boules with someone else’s name on them?
Yes, because the approval rules allow a player’s name, initials or another symbol in an extra engraving. Check that the maker’s mark, the label and the weight are still readable next to it.
Is light rust a problem on used boules?
Not if it is on the surface. A brass brush and a drop of oil remove it, but deep pitting is permanent.
Check the steel under the rust before you pay. Rust that hides pits or thin spots is the case to turn down.
Do pétanque boules wear out?
Slowly. Play takes weight off the steel, and the approval rules allow a loss of up to 15 g below the marked weight, while the official rules still require at least 650 g.
Can I re-temper used boules to make them softer or harder?
No. The official rules forbid re-tempering to change the hardness the maker applied, and a player who does it is disqualified.
